|C||Material Code||A: Aluminum, C: Copper, S: Stainless Steel 304 (EN 1.4301)|
|20||Diameter||20: 3/8″, 22: 1/2″, 24: 5/8″|
|8||Length||1: 10″, 2: 12″, 3: 15″, 4: 18″, 5: 24″, 6: 30″, 7: 36″, 8: 48″
9: For all non-standard lengths and lengths greater than 48″
|B*||Finish Code||B: Bare, L: Tinned|
|ST*||Tip Type||ST: Safety Tip|
|XX*||Overall Terminal Length||Used for non-standard lengths and lengths from 49″ to 99″. Must be order in whole inch increments.|
|C||Bend Angle||A: 15°, B: 30°, C: 45°, D: 60°, E: 75°, F: 90°|
|N||Bend Length||M: 4″, N: 6″, P: 8″, Q: 10″, R: 12″, S: 14″|
|Part Number||Thread SizeTS||DiameterØ||Type||LengthL||Anglea||A|
|LPC208BSTOSCN||3/8 UNC||9.5 mm||Blunt||1,219.2 mm||45°||152.4 mm|
nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at tokopetir.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.